Highlight:
Heat Transfer Pet DTF Film
, Fabric Printing Pet DTF Film
, Hot Peel Pet DTF Film
Fabric Printing Hot Peel Pet DTF Film Print Dtf Film Roll Heat Transfer Film
Fabric Printing Hot Peel Pet DTF Film Print Dtf Film Roll Heat Transfer Film
Printing Surface: PET DTF film has a specially coated surface that allows for the printing of designs using compatible DTF printers and inks. The coating ensures proper ink adhesion and prevents smudging or bleeding of the design.
Transparency: PET DTF film is generally transparent, which allows for accurate positioning of the design onto the fabric during the transfer process. The transparency helps align the film with the fabric to achieve precise placement of the design.
Compatibility with DTF Inks: PET DTF film is designed to be compatible with DTF inks, which are formulated specifically for the DTF printing process. The film's coating allows the inks to adhere properly and maintain vibrant colors and sharp details in the printed design.
Printable on Both Sides: PET DTF film often has printability on both sides, providing flexibility in the printing process. Designs can be printed on either side of the film, allowing for efficient utilization and reducing material waste.
DTF PET Film Physical Characteristics:
|
Product
Specification
|
Conventional Thickness |
0.075mm, 0.10mm |
| Conventional Length |
100m |
| Conventional Width |
30cm,33cm,60cm |
| Finished Product |
0.075mm*600mm*100m/roll |
| Operating Conditions |
Heat Press Temperature |
130℃-160℃ |
| Heat Press Time |
8-15 seconds |
| Pressure |
0.3-0.5mpa |
| Washing Resistance |
Washable Temperature |
45℃-60℃ |
| Storage Conditions & Shelf Life |
It is strictly forbidden to collide with sharp objects. When opening the package and not using it, please seal it and store it to prevent moisture and high temperature |
| The storage conditions are temperature -5℃-30℃, humidity 40-80%, avoid direct sunlight, shelf life is one year |
Cautions:
1. Tear-off method: cold or hot tear.
2. Printed film is a soft product. It is normal for the surface to be slightly sticky, and the surfaces should be prevented from sticking to each other.
3. Reasonable control of temperature and pressing time. If the temperature is too high or the time is too long, it is easy to cause discolouration or loss of elasticity.
Application of DTF PET Film:
Design Preparation: Create or obtain the desired design that you want to transfer onto the fabric. Ensure that the design is in a compatible format for printing and is properly sized and aligned.
DTF Printing: Use a compatible DTF printer to print the design onto the PET DTF film. Follow the printer manufacturer's instructions for proper setup, including loading the film onto the printer and adjusting the printing settings such as resolution and color management.
Film Alignment: Once the design is printed on the PET DTF film, carefully align the film on top of the fabric where you want the design to be transferred. Make sure the film is positioned correctly, considering factors like centering, orientation, and any specific design requirements.
Heat Press Setup: Prepare a heat press machine by setting the appropriate temperature, time, and pressure based on the specific PET DTF film and fabric being used. Refer to the manufacturer's guidelines for recommended heat press settings.
WHY CHOOSE US
1. Customised services
2. Professional after-sales service
3. Low price
4. High quality
Save a lot of cost and money.
Make printing easier.
5. Security
Faster speed and lower cost.
Environmentally friendly Non-toxic and odourless. No toluene.
Your message must be between 20-3,000 characters!
