|
Product Details:
Payment & Shipping Terms:
|
| Color: | White Mist Translucent | Density: | 1.20±0.02g/cm3 |
|---|---|---|---|
| Opening Time: | 8min | Hardness: | 96±2 Shore A |
| Melt Flow Index: | 10±4g/10min; Condition:ASTMD1238-04 | Rheology Temperature: | 90°C -100°C |
| Operating Temperature: | 120°C -150°C | Release Liner: | Glassine Release Paper |
| Thickness: | 0.0125mm-1mm | Width: | 5mm-1500mm |
| High Light: | hot melt adhesive film,adhesive plastic film |
||
Polyurethane Film Double Sided Hot Melt Adhesive For Fabric Lamination
Description:
This product is a thermoplastic material, for a variety of materials can be applied to the hot melt adhesive, It can repeatedly heated plastic bonding. This kind of hot melt adhesive has good adhesion to textile, polyester, cotton, blended fabric, TPU, PVC, PC / ABS, and has good resilience, elasticity, heat resistance, cold resistance and water resistance .
Applications:
DS8613 development direction and application is for clothing, shoes, textile accessories, handbags, luggage, ipad protective cover, mobile phone protective cover, sports equipment and other materials bonding.
Composition:
Polyurethane
TPU Hot Melt Adhesive Film Physical Characteristics:
|
Color |
white mist translucent |
Release Liner |
Glassine release paper |
|
Density |
1.20±0.02g/cm3 |
Thickness |
0.0125mm-1mm |
|
Opening Time |
8min |
Width |
5mm-1500mm |
|
Hardness |
96±2 Shore A |
Conventional thickness |
0.03mm,0.05mm,0.08mm |
|
Melt Flow Index |
10±4g/10min; Condition:ASTMD1238-04 |
Conventional Width |
1380mm |
Rheology Temperature |
90°C -100°C |
Length |
100 yards |
|
Operating Temperature
|
120°C -150°C |
Finished Products specification |
1380mm*100yards/roll |
TPU Hot Melt Adhesive Film Recommended Bonding Conditions:
|
Flat Press |
Second Flat Press |
|
Machine Setting: 110℃-130℃ |
Machine Setting: 120℃-150℃ |
|
Dwell Time: 5-15 seconds |
Dwell Time: 8-25seconds |
|
Pressure: 0.3-0.6mpa |
Pressure: 0.3-0.6mpa |
1, Bonding temperature and pressure as well as the time involved in the strength of the film to material. Bonding temperature must be close to the machine set the temperature, the pressure must be uniform, mold and pressure roller must be flat.
2, In different machinery and materials, the bonding conditions used will be different. The conditions marked here are only basic. The optimum bonding conditions should be made by creating suitable construction conditions for the particular applicationdamage, direct or consequential, arising out of the use, misuse or inability to use the product.
NOTICE: Seller hereby excludes any express warranties and the implied warranties of merchantability and fitness for a particular purpose. The following is made in lieu of any such warranties. Tunsing believes the information supplied are reliable, but does not guarantee that any results shown or claimed will be obtained. Before using the user shall determine the suitability and fitness of the product for its intended use. The user assumes all risks and liability whatever in connection with its own tests and use. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use, misuse or inability to use the product.
Detail Description
|
Type |
Color |
Density |
Melting Point |
Operating Temperature |
|
DS8502 |
transparent |
1.18±0.02g/cm3 |
95°C |
125°C -155°C |
|
DS8507 |
transparent |
1.18±0.02g/cm3 |
105°C |
135°C -165°C |
|
DS8610 |
white mist translucent |
1.20±0.02g/cm3 |
60°C |
90°C -130°C |
|
DS8613 |
white mist translucent |
1.20±0.02g/cm3 |
90°C -100°C |
120°C -150°C |
|
DS8614 |
white mist translucent |
1.18±0.02g/cm3 |
90°C -100°C |
120°C -150°C |
Our company has passed ISO9001:2015 quality management system certification, and all products in our company are up to RoHS,REACH, Oeko-tex, California Proposition 65, Halogen Test Report, PFOA, PFOS, PAHS, HBCDD and other environmental standards.
Our company participates in the French exhibition India Exhibition Bangladesh Exhibition every year , recommend excellent products to the world.
1. Your inquiry will be replied within 24 hours and online service is available all the time.
2. Well-trained & professional sales persons are here ready to answer all your questions and handle the problems.
3. Prompt delivery time: within 15 days after agreement
4. Flexible payment terms: T/T, L/C, O/A, Western Union, Paypal, Escrow, etc.
5. Your business relationship with us will be confidential to any third party.
6. Good after-sale service offered, please get back if you got question.
Q1) . How about your MOQ of your Adhesive Film?
Our TPU, PES ,PA hot melt adhesive film , MOQ is 100yards/roll ,.
Q2). What is your Particle size ?
Our PES ,TPU , PA , PO , 0-80um, 80-170um , 170um-250um ,
Q3). Do you provide free sample? And how many days it will take?
Yes, we provide free 0.5-1kg sample, only need you to pay the shipping cost. We will make the sample within 3 working days and it will take 3-7days on the transportation.
Q4). What is your lead time ?
3-5 days , depending on the quantity , we almost have safe stock .
Q6). How do I pay for my order?
We accept L/C ,T/T ,Western Union , Paypal .
Contact Me
Contact Person: Cynthia Liang
Tel: 86 18126266192
| Factory Address:Tunsing Industrial Zone, No. 28 Xiatian village, Longtian street, Pingshan District, Shenzhen City, Guangdong Province, China | |
| Sales office:Tunsing Industrial Zone, No. 28 Xiatian village, Longtian street, Pingshan District, Shenzhen City, Guangdong Province, China | |
| +86-755-8996-0062 | |
| ts04@tunsing.com.cn | |
