Payment & Shipping Terms:
|Key Word:||Hot Melt Adhesive Tape For Galvanized Metal||Material:||PET|
|Tensile Strength:||1.855MPa||Melting Teperature:||95℃±5|
|Width:||9mm, 10mm,12mm And 16mm||Length:||450m-800m|
hot melt adhesive film,
thermal adhesive tape
Hot Melt Adhesive Tape For Galvanized Metal Single Sided Pet and Thermoadhesive
Hot Melt Adhesive Tape For Galvanized Metal Description:
This product is a double layer high and low temperature structure of single-side hot pressing adhesive, can be repeatedly heated plasticizing bonding. This hot pressing adhesive is designed for the arrangement of metal locks in food packaging industry. It is ultimately suitable for all automatic and manual food packaging equipment locks. It has a good bonding effect on steel nails, row nails, aluminum buckle, paper row nails and galvanized metals.
Hot Melt Adhesive Tape For Galvanized Metal Physical Characteristics:
|Tensile Strength||1.855MPa (condition is 10mm width)||Length||600m/roll|
Hot Melt Adhesive Tape For Galvanized Metal Applications:
DS0262 is used for all kinds of C-type nails, M-type nails, T-nails, O-bolts, and U-shaped metal buckles.
Recommended Bonding Conditions:
|Pressing Temperature:||230℃-240℃||Working Speed||170PCS/Min|
This product is repelled with oil. Before use, the aluminum buckle material must be cleaned and then the composite bond is hot pressed.
The above conditions are only recommended processing parameters. The manufacturer needs to adjust according to the actual temperature, pressure and speed of the equipment before use to match the optimal construction conditions.
1. Bonding temperature and pressure and time relate to the bonding strength of the film to the material. The bonding temperature must be close to the temperature set by the machine, the pressure must be uniform, and the mold and press rolls must be flat.
2. The bonding conditions used will vary between machines and materials. The conditions indicated here are only basic. The most ideal bonding conditions should be established by manufacturing for the specific application.
Note: The seller hereby declares that Tunsing will refuse to accept the assurance of the components of the manufacturing process.
Contact Person: Tina Chen