Payment & Shipping Terms:
|Release Liner:||PET Release Film||Melting Point:||90℃|
|Conventional Width:||420mm||Melt Flow Index:||40±10g/10min Condition：ASTM D1238-04|
|Length:||50M||Washing Resistant Time:||40°C/72H|
|Type:||Self Adhesive Film|
Polyester Hot Melt Adhesive Film,
Transparent Hot Melt Adhesive Film,
Thermoplastic Tpu Adhesive Film
Transparent Double Sided Pet Self Adhesive Film For Shoes Cloth
Recommended Bonding Conditions:
This product is a self-adhesive hot melt film. Double layer structure: the first layer is hot melt adhesive (no viscosity under normal temperature, need to be heated), and the other layer is acrylic acid pressure sensitive adhesive (in normal temperature, there is self-adhesive energy and the entrusted off-type paper)Self-adhesive level can be no less than 150 degree temperature, not lose the glue, and also can be paste repeatedly, in line with the European demand index.
DS019YKL-5 development direction and application is mainly applicable to the cloth and shoe material hot drilling.
Composition:Ethylene acrylic acid copolymer
1, Bonding temperature and pressure as well as the time involved in the strength of the film to material. Bonding
temperature must be close to the machine set the temperature, the pressure must be uniform, mold and pressure
roller must be flat.
2, In different machinery and materials, the bonding conditions used will be different. The conditions marked here are
only basic. The optimum bonding conditions should be made by creating suitable construction conditions for the
particular application damage, direct or consequential, arising out of the use, misuse or inability to use the product.
Packaging & Shipping
packing: 50 meters in roll, 2 rolls in case
1 .How about hot melt adhesive film?
A: It is just a film, and the basic material is release paper. But the film is solid in room temperature, when reach its melt
point, it is able to bond other materials, Different materials of hot melt adhesive film have different performances and different
usages, we need understand your demands ,then recommend you right products to you.
2.Do you accept OEM or ODM?
Yes ,we accept OEM and ODM, we are professional heat transfer material manufacturer ,having more than 10years experience. able to
assist you R&D new products. So if you need bonding some special materials, please don't hesitate to let us know.
3.How do you transport the products?
If you are not urgent, we usually transport by ship because it is the cheapest way. But for the West Asia area,
we deliver by train because there is no sea to ship. And for samples and urgent cargo, we transport it by air as it is the fastest
way .Of course if you have other better idea about transport, we will accept it.
4. May I have your samples?
If you need some sample for reference, please let us know your fully address/ship
mode with courier ,and we will arrange sample for your reference.
5. How long is the lead time?
Sample lead time:3-7 days
Bulk lead time:7-10 days(depends on order quantity)
6. How do I pay for my order?
We accept L/C ,T/T ,Western Union , Paypal , Escrow
Contact Person: Lily
Tel: +86 18126094427